blogs.wti.com

blogs.wti.com

WTI – Western Telematic Inc.

blogs.wti.com RSS Feed
 
 
 
 

Archive for August, 2010

Can Your Console Switch Tell You When Equipment is Misbehaving?

Most console switch products can provide network administrators with vital tools to allow management and troubleshooting capabilities for network devices at remote installation sites, but wouldn’t it be handy if your console switch could also automatically notify you when a network device ceases to function? WTI console switch products include a heartbeat feature, which when [...]

Do You Need to Know When Power to Network Devices has Been Interrupted?

WTI RSM and TSM serial switch products include a power cycle alarm, which can be used to provide notification when power to the serial switch is interrupted for any reason. This may go without saying, but in most cases, when power to your serial switch has been interrupted, this generally means that power to your [...]

What Can SNMP MIB Support Do for Your Data Center?

SNMP MIB support provides a crucial element for console switch applications. MIB support enables the console switch to address and interpret commands issued by 3rd party software such as OpenView or Solaris, essentially allowing the console switch to accept commands and poll information via the 3rd party software.

Remote Device Management

SNMP based control and monitoring of remote network devices is a valuable tool for almost any network administrator. WTI Serial Console Servers and Switched PDUs provide full MIB support, allowing you to review status, change configuration parameters, edit user privileges and control operating functions at remote units via SNMP commands.

Creating Outbound SSH Connections

When normal in band communication is not available, WTI’s TSM Series Serial Console Servers provide a convenient means to create secure, encrypted, outbound SSH connections to network devices via dial up. This means that even when you can’t establish a normal network connection, you can still dial into the TSM via modem and create outbound [...]

Remote Console and Power Management for Cisco Routers

All servers and routers will lock up and cease to function sometimes; even top quality equipment like Cisco routers and switches. Have you ever been woken up in the middle of night by a call from work, and then had to drive all the way to your office just to unlock or reboot an uncooperative [...]

Remote Power Rebooting

When a piece of LAN/WAN, telecom, or other control equipment has “locked-up” and is no longer responding to normal methods of communication, it is often necessary to perform a cold boot of the equipment. After the power has been cycled on and off, normal communications via the network can resume. This is often difficult when [...]

Out of Band Network Management in the Data Center

When in-band network management paths are unable to provide network administrators with the necessary means to management remote network hardware, an out-of-band network management strategy is a valuable addition to the arsenal of any network administrator who has network elements distributed across wide area networks. Implementation of an out-of-band management solution allows a network administrator [...]

SNMP Network Control …

SNMP based control and monitoring of remote network devices is a valuable tool for almost any network administrator. WTI’s Serial Console Servers and Switched PDUs provide full MIB support, allowing you to review status, change configuration parameters, edit user privileges and control operating functions at remote units via SNMP commands.

Automatic Transfer Switch for Rack-Mount Network Equipment!

It can be a real pain in the wallet when single power supply hardware loses voltage and shuts down. It can cost a fortune to replace single cord devices with redundant dual power supplies or worse, to change the backup power configuration for your entire network. An automatic transfer switch can provide automatic power redundancy [...]

Recent Posts

Popular Posts

Archives

Tags

Twitter links powered by Tweet This v1.8.3, a WordPress plugin for Twitter.